How to read crochet patterns: a line-by-line walkthrough
Read a crochet pattern from the top: materials, gauge, abbreviations, rows and rounds, repeats, stitch counts and the US or UK terms it is written in.
· Updated · 7 min read

To read a crochet pattern, start at the top, not at row 1. Read the materials, the gauge and the abbreviations list first, check whether it is written in US or UK terms, and only then work the rows one line at a time. Each line tells you which stitches to make and where to put them. Most lines end with a number in brackets: the stitch count you should have when that line is done.
That top section answers most of the questions you will have later. Here is what each part means, using a small made-up pattern in US terms as the example.
The top of the pattern
Before row 1, most patterns list the same few things.
Materials. The yarn (name, weight and how many balls or skeins), the hook size, and notions such as stitch markers or a tapestry needle. US patterns often print the hook two ways, like I-9 (5.5 mm): match the millimetres, and use the crochet hook size chart if your hooks only show letters. If you are not using the exact yarn named, match the weight first. Our yarn weight chart lines up the US, UK and Australian names.
Finished size. Sometimes one size, sometimes several in brackets, like S (M, L). If you see more than one number, read how to read size brackets before you go further, then mark your size on every line.
Gauge (UK: tension). It looks like this:
14 sts and 8 rows = 4 in (10 cm) in dc, using a 5 mm hook.
It means that in double crochet (US terms), 14 stitches across and 8 rows up should measure 4 inches. If your swatch has more stitches, your piece will come out smaller than planned, so try a bigger hook. Fewer stitches, try a smaller hook. For a dishcloth it barely matters. For a garment it decides whether it fits.
Notes. Read these twice. This is where the designer says whether the turning chain counts as a stitch, whether rounds are joined or worked in a spiral, and which side is the right side.
Abbreviations and US or UK terms
Patterns are written in short codes: ch for chain, sc for single crochet, sk for skip (UK: miss), st for stitch, rep for repeat. Most patterns print a key. If yours does not, our crochet abbreviations list covers the ones you meet first, and the abbreviation lookup finds the rest.
Then check which terms the pattern uses. US and UK crochet use the same names for different stitches, shifted by one:
| US term | UK term |
|---|---|
| single crochet (sc) | double crochet (dc) |
| half double crochet (hdc) | half treble (htr) |
| double crochet (dc) | treble (tr) |
| treble (tr) | double treble (dtr) |
So “dc” in a UK pattern is the stitch an American calls single crochet. If the pattern does not say which it uses, US vs UK crochet terms shows how to tell in a few lines. The rest of this post uses US terms.
Reading a row, piece by piece
Here is the start of a simple flat piece:
Ch 21.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (20 sts)
Row 2: Ch 1 (does not count as a st), sc in each st across, turn. (20 sts)
Take it phrase by phrase. Commas separate the steps, and you work them in order.
- Ch 21. Make a foundation chain of 21. The slip knot on your hook does not count.
- Sc in 2nd ch from hook. Skip the chain closest to the hook and put your first single crochet into the next one. That skipped chain stands in for the height of the first stitch.
- and in each ch across. One sc in every remaining chain.
- turn. Flip the work so the other side faces you.
- (20 sts). The stitch count. You started with 21 chains and skipped one, so 20 stitches.
Row 2 starts with a turning chain. The note in brackets matters: “does not count as a st” means your first sc goes into the very first stitch, not the second. When a turning chain does count, the pattern usually says “ch 3 (counts as first dc)” and you skip the first stitch instead.
Count at the end of every row for the first few rows. If you have 19 or 21, the edge is the usual cause: a missed first stitch, or an extra stitch worked into the turning chain.
Rows and rounds
“Row” means you work back and forth and turn. “Rnd” or “round” means you work in a circle, usually without turning, so the same side faces you.
Rnd 1: Ch 2, 6 sc in 2nd ch from hook. (6 sts)
Rnd 2: 2 sc in each st around. (12 sts)
Rnd 3: *Sc in next st, 2 sc in next st; rep from * around. (18 sts)
Two things to look for in round patterns. First, whether you join each round or keep going in a spiral. To join, put your hook into the top of the first stitch of the round and work a slip stitch (sl st). Second, where the round starts. In a spiral there is no visible seam, so put a stitch marker in the first stitch of each round and move it up as you go.
Repeats, parentheses and asterisks
Round 3 above has an asterisk. Work what follows it, then go back to the asterisk and do it again until you reach the end of the round. On 12 stitches, “sc in next st, 2 sc in next st” uses 2 stitches each time, so you work it 6 times and finish with 18.
Parentheses do two different jobs in crochet:
(Sc, ch 1) 3 times.
(2 dc, ch 2, 2 dc) in next ch-sp.
The first has a number after it, so you repeat the group 3 times. The second has no number but says “in next ch-sp” (the gap under a chain from an earlier row), so you work the whole group into that one space. That group is called a shell.
You will also see whole rows repeated, as in “rep rows 2–3 until piece measures 8 in”. How to read pattern repeats goes through every kind, including nested brackets.
Phrases that are not abbreviations
Some instructions are plain words with a specific meaning:
- Across: to the end of the row.
- Around: to the end of the round.
- Work even: one stitch in each stitch, so the count stays the same as the row before.
- Fasten off: cut the yarn and pull the tail through the last loop.
- RS / WS: right side and wrong side. Many patterns say “Row 1 (RS)” so you can mark that side with a clip.
A routine that keeps you on track
Before each row, read the whole line once to the end, including the stitch count. Then work it, saying each step to yourself as you go. At the end, count. If the count is right, tick the row off on your copy or note it on a counter. Our online row counter does this in a browser tab.
If you keep losing your place, Yarnstep can help. You import the PDF or a photo of the pattern, pick your size once, and it shows one row at a time with the original line under it, the stitch count to check against and a counter that moves with the rows. Yarnstep is coming soon to iPhone, iPad and Android.
When a line still does not make sense, work it slowly on a small swatch before you try it in the real piece. Stitch names like inc, dec and BLO are in the abbreviations list too.
Questions people ask
Do I read a crochet pattern from left to right?
Written patterns read like any text: left to right, one row or round per line. Only symbol charts change direction, because they follow the way the rows turn.
Does the turning chain count as a stitch?
It depends on the designer. Look for "ch 1 (does not count as a st)" or "ch 3 (counts as first dc)" in the row or in the notes. If the chain does not count, work your first stitch into the first stitch of the row.
What does the number in brackets at the end of a row mean?
It is the stitch count: how many stitches you should have once that row is done. Count yours before you start the next row.
How do I know if a pattern uses US or UK terms?
Check the notes or the abbreviations list first. If neither says, look at the stitch names: htr, dtr and "miss" only appear in UK patterns, and sc or hdc only in US ones. A pattern with nothing but ch and dc needs a closer look at the stitch heights and the designer's notes.


